Ametek Lx Series II Programming Manual Manuale Utente Scaricare il pdf (Pagina 186)

Programming Manual Lx \ Ls Series II

182

8.2.16 End of String Delimiter

The End of String (EOS) delimiter recognized by the Ls AC Power source in APE mode is the ASCII

Line Feed (LF). Carriage Return (CR) followed by Line Feed may also be used for EOS. The End

or Identify (EOI) IEEE-488 message END will also be recognized. The END message is sent by

setting the IEEE-488 End or Identify line true with the last data byte.

8.2.17 Group Execute Trigger - GET

The trigger mode is enabled when the mnemonic TRG is added to a setup string. The trigger

command may be inserted anywhere in the string. When the mnemonic is detected, it will delay

execution of the new setup values until the GPIB Device Trigger is sent by the bus controller.

A GPIB Device Trigger will also terminate a programmed ramp or other program.

The following setup string will recall the values from register 9 and delay execution until the GET

message is received. (Note: GET is the abbreviation for the GPIB Group Execute Trigger message

and does not represent a series of ASCII characters.

REC9 TRG

1 2 ... 181 182 183 184 185 186 187 188 189 190 191 ... 241 242

Nessun commento

Ametek Lx Series II Programming Manual Manuale Utente Pagina 186